TSP043 Dual Character Rom Thermal Printer
Features :
- "Intelligent" Design - robust dust / splash proof printer cover
- Built-in dual Chinese Character rom - Traditional & Simple Chinese
- Built-in USB interface plus additional parallel or serial port
- ESC/POS™ emulation with StarPRNT Intelligence & Configuration Utility
- Low Cost Installation
- Easy Paper Loading with max 103mm diameter Paper Roll capacity
- Superior quality hardware & 203dpi Output
- Low Cost Maintenance - simple replacement of print head, cutter and PCB
Introduction / Specification / Catalog / Manual / Driver / SDK / Utility / Accessories ：
Introduction
New Budget, High Performance, Low Cost Receipt Printer designed specifically to meet basic receipt printing needs.
With its robust design and lever-free paper loading, this printer is designed to perform in the harshest of retail and hospitality environments. Its high speed processing of receipts (up to 300mm/second) as well as dual interface make it the first choice for retailers and hospitality operators globally.
Specification
Series ： TSP043
Model ： TSP043UC USB + Parallel interface
Model ： TSP043UD USB + Serial interface
General : | |
| Printing Method | Direct Line Thermal Printing |
| Print Resolution | 203 dpi |
| Printing Speed | Up to 250mm/second |
| Logo Store | Epson compatible - up to 512KB / 9,025 logos (new) |
| Emulation | ESC/POS™ |
| Code Pages | 40 + 1 blank |
| Character Size | Font A: 12 x 24; Font B: 9 x 24 |
| Line Spacing | Font A: 42/48(80mm) or 30/33(58mm); Font B: 56/64(80mm) or 40/45(58mm) (Selectable by Memory Switch) |
| Compressed Print | Vertical 50%, Horizontal 67% (by Firmware) |
| Barcodes | 1D X 9 versions / 2D - PDF417 & QR |
| Paper Sensor | Photo PE sensor : Standard |
| Autocutter | Partial Cut (One-Point Center) / Guillotine Type |
Paper : | |
| Width | 58 / 80mm (80mm default with 58mm guide) |
| Printable Width | 64mm / 45mm (72mm / 50.8mm Selectable by Memory Switch) |
| Roll Diameter | up to 102mm |
| Thickness | 0.065 - 0.085mm (0.057 - 0.065mm special paper only) |
| Top Margin | Approx. 11mm |
Power : | |
| Power Supply | PS60A |
| Input / Supply Voltage | 100V (-10%) to 240V (+10%) / 24V DC |
Interface : | |
| Dual Interface | USB + Serial; USB + Parallel |
Reliability : | |
| Reliability | 60 million lines MCBF |
| Min Cut Length | 24mm (0.065mm <= paper thickness <= 0.085mm) |
| Autocutter Life | 1 million cuts |
| Print Head Life | 100 KM (using recommended paper) |
Measurement : | |
| Dimensions | 142(W) X 212(D) X 149(H) mm |
| Weight | 1.39 Kg (only printer except roll paper) |
Additional : | |
| Simplified Tear-Bar | Supported |
| Vertical Use | Not Supported (only up to 45 degrees) |
Catalog